|
displaying posts 1 to 4 of 4
| Author | Subject: Torque / tension specs |
 boob
Newbie  Location: Surrey Registered: 22 May 2009 Posts: 11 Status: Offline |
Post #1
Hi All,Being a bit of a noob here, but can't seem to find the torque specs for any of the bolts to do with the wishbone on my 306. Planning on changing the balljoints this afternoon, so want to know whether I should try to read the bolts for the recommended torque or if the numbers are out there somewhere. Apparently my Haynes manual is supposed to have these in, but no luck. Cheers for any help, much appreciated... |
 Posted 31st Aug 2009 at 20:19
|
|
|
craigy_87
Seasoned Pro  Location: wishaw Registered: 06 Jan 2008 Posts: 1,325 Status: Offline |
|
|
Posted 31st Aug 2009 at 20:29
|
|
|
welshpug!
Capt Pedantic  Location: Bigend, Wales. Registered: 27 Mar 2007 Posts: 25,838 Status: Offline |
Post #3
yup, haynes has them all just fiiine  ________________________________________ need a part number? get on here - http://public.servicebox.peugeot.comBring on the Trumpets. |
|
Posted 31st Aug 2009 at 20:37
|
|
|
boob
Newbie Location: Surrey Registered: 22 May 2009 Posts: 11 Status: Offline |
Post #4
Cheers both... it turns out that I genuinely am a complete hactual retard and I was skipping the boring bit at the beginning of the chapter.  cheers |
|
Posted 31st Aug 2009 at 23:26
|
|
The Peugeot GTi-6 & Rallye Owners Club - ©2024 all rights reserved.
Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy.